System Specifications
.jpg)
Technical Requirements in Joinery and Façade Systems
- Profiles required by the suggested implementation should be chosen from the system manufacturer’s catalog.
- Production should be made using 6060-6063 alloyed profiles that are suitable for anodic oxidation and that allow exact tolerance designs.
- Leakproof and dust collecting cords should be E.P.D.M.
- Flexible silicon or tiachol-based materials should be used to provide insulation.
- For outside usage, A4 stainless steel visible screws and A2 stainless steel invisible screws should be preferred.
- Heat insulation barriers should be made of polyamide.
- Steel parts for anchors and reinforcement should be galvanized.
Accessory Specifications
- Attached channel sizes and shapes are in accordance with EURO standards that determine systems’ case-wing relations.
- Opening mechanisms such as handles, hinges, dual-axis etc. should be in full compliance with the system and should comprise technical specifications suggested by the system manufacturer.
- Shapes of accessories to be placed in profile slots should be the same as those of profiles.
EPDM CONTA Malzeme Özellikleri ve Avantajları
- Longevity: E.P.D.M. is an indispensable specification of gaskets. There is no alternative to E.P.D.M. when it comes to resistance to physical factors, temperature changes, aging, and other laboratory tests.
- Resistance to ozone: Atmospheric ozone, which normally causes cracks in gaskets, does not harm E.P.D.M. gaskets.
- Flexibility: Rate of deformation due to stretching, buckling, pressing, etc. is minimized in E.P.D.M. compared to other gaskets.
- Resistance to abrasion: E.P.D.M. is more resistant to corrosion caused by friction.
E.P.D.M. GASKET’S TECHNICAL SPECIFICATIONS
HEAT INSULATION BARRIER Materials Report
| Material : | PA 66 GF 25 (polyamide with 25% glass fiber reinforced) |
| Shape resistance : | 250 ± 5 °C |
| Density : | 1,3 ± 0.05 g / cm |
| Firmness : | 84 ± 2 Shore |
| K-value : | 0,32 W / m.K |
| Specifications | Unit | DIN-Norm Values | Implementation Values |
| E-Module | N / mm² | 7.300 – 8.000 ( DIN 53457 ) | min. 2.900 |
| Bending Strength | N / mm² | 120 ( DIN 53455 ) | min. 80 |
| Stretching Strength | N / mm² | 170 ( DIN 53452 ) | min. 80 |
| Impact Strength | kJ / m² | 35 ( DIN 53453 ) | 30 kJ / m² |
Joinery Systems Heat Permeability Diagram
Test Reports – 1 İTÜ (İstanbul Technical University) Heat Permeability Coefficient Assessment
.
Air Escape EN 12207
Water Escape EN 12208
Portion EN 12210
Normlara uygunluğu test raporları ile belirlenmiştir. ( Turkcesi verilmemis )
Test Raports -2 Yalıtımlı Doğrama Sistemi
Air Escape EN 12207
Water Escape EN 12208
Portion EN 12210
Normlara uygunluğu test raporları ile belirlenmiştir.
Foreign Exchange
| USD | |
| Purchase | Sale |
| 1.4936 | 1.5008 |
| Euro | |
| Purchase | Sale |
| 1.9252 | 1.9345 |
Newsletter
Click here for subscription
